TravcoForum.com

Travco Classic Motorhome Support & Discussion Forum

Skip to content

Change font size

Board index » Generators
Discuss Onan, Kohler and whatever here. Also check out Smokstak.com

Found a supplier for Starter bracket

Unread postby KB2CRK on Thu Jan 07, 2016 2:15 pm

onan bracket.gif

Found a starter bracket Thanks to Smokstak
And applied GMC
http://www.appliedgmc.com/level.itml/icOid/487
You do not have the required permissions to view the files attached to this post.
User avatar
KB2CRK
Moderator
Moderator
 
Posts: 869
Joined: Wed Nov 19, 2014 2:26 pm
Location: Arnoldsville GA
Travco Model: 76 Mahal 2+2

Re: Found a supplier for Starter bracket

Unread postby KB2CRK on Sat Jan 09, 2016 6:26 pm

Got the bracket today right before I left for work. It looks to be the right one just heavier duty. A little more meat to the cast. I will put it on and try it out Monday or Tuesday depending on how the Brake job goes.
User avatar
KB2CRK
Moderator
Moderator
 
Posts: 869
Joined: Wed Nov 19, 2014 2:26 pm
Location: Arnoldsville GA
Travco Model: 76 Mahal 2+2

Re: Found a supplier for Starter bracket

Unread postby KB2CRK on Tue Jan 12, 2016 11:36 am

New and old brackets. New one is thicker.
Image
Image
Image
User avatar
KB2CRK
Moderator
Moderator
 
Posts: 869
Joined: Wed Nov 19, 2014 2:26 pm
Location: Arnoldsville GA
Travco Model: 76 Mahal 2+2

Re: Found a supplier for Starter bracket

Unread postby KB2CRK on Tue Jan 12, 2016 11:38 am

Fun to get to.
Image
Image
Image
User avatar
KB2CRK
Moderator
Moderator
 
Posts: 869
Joined: Wed Nov 19, 2014 2:26 pm
Location: Arnoldsville GA
Travco Model: 76 Mahal 2+2

Re: Found a supplier for Starter bracket

Unread postby KB2CRK on Tue Jan 12, 2016 12:49 pm

Generator is up and running. Exercising it right now. The old bracket seemed to allow starter movement when cranking. No movement at all with the new bracket.
User avatar
KB2CRK
Moderator
Moderator
 
Posts: 869
Joined: Wed Nov 19, 2014 2:26 pm
Location: Arnoldsville GA
Travco Model: 76 Mahal 2+2

Re: Found a supplier for Starter bracket

Unread postby KB2CRK on Wed Jan 13, 2016 7:43 am

Part # for the bracket through Applied GMC is GM28-045-37.
The last good Onan # was 191-0929. It has been discontinued.
User avatar
KB2CRK
Moderator
Moderator
 
Posts: 869
Joined: Wed Nov 19, 2014 2:26 pm
Location: Arnoldsville GA
Travco Model: 76 Mahal 2+2

Re: Found a supplier for Starter bracket

Unread postby 77Travco on Thu Jan 14, 2016 8:37 am

Good info to know. i hope I never have to do this! :D
User avatar
77Travco
Moderator
Moderator
 
Posts: 1146
Joined: Sat Jan 26, 2013 2:32 am
Location: Kerrville, Texas
Travco Model:

Re: Found a supplier for Starter bracket

Unread postby KB2CRK on Thu Jan 14, 2016 9:19 am

77Travco wrote:Good info to know. i hope I never have to do this! :D

It is time consuming but not really difficult to do. You do need a puller and torque wrench for the flywheel. everything else is 1/4 20 bolts with 3/8" heads.
User avatar
KB2CRK
Moderator
Moderator
 
Posts: 869
Joined: Wed Nov 19, 2014 2:26 pm
Location: Arnoldsville GA
Travco Model: 76 Mahal 2+2


Return to Generators

Who is online

Users browsing this forum: No registered users and 1 guest